Operate your Pan Tilt unit from across the room
or across the street. Save time, no long wires to install. Safer,
less wires to trip people.
RF penetrates walls, so it is not necessary to aim the remote
control transmitter at the receiver |
Wireless Keychain
Controller
Works with MP-101b, MP-360, PT400t, PT500c and PT1000c
pan tilt units only. |
 |
|
Model # KPT-MP
Wireless Pan & Tilt Remote Control
|
   |
Model KPT-MP
Keychain Pan Tilt
for pan tilt motors.
One model works with MP-101 & MP-360 pan tilts only.
One model works with PT400t only.
One model works with PT500c only.
One model works with PT1000c only.
Must be purchased at the same time as the pan tilt unit.
You can pan and tilt at the same time,
you can make diagonal movements.
Variable speed control for MP-101 & MP-360 pan tilts
only.
The continuously variable speed control is in the compartment
on the backside of the receiver. Slide the small cover off and
turn the knob to adjust the speed.
Button #1 is Tilt Up and #4 is Tilt Down.
Button #3 is Pan Left and #2 is Pan Right.
Up to 16 keychain transmitters can be used with 16 receivers to
control 16 different pan tilt units in the same room at the same
time.
Up to 6 keychain transmitters can be used with one receiver to
control one pan tilt unit.
Keep the antenna in the clear & elevated.
|
Manufactures Specifications:
Operating temperature: ---------------39 F to 110 F.
Transmission Range --------------------Up to 200 feet.
Transmitter, Controller ------------------4 button hand held remote
control keychain
Transmitter Power Source ----------# 27A Battery, 12 Volts DC.
Transmitter Weight: --------------------1 ounce.
Transmitter Dimensions: --------------2" High x 1.5 " Wide x 0.5"
Deep.
Receiver power cable ----------------- 3 feet long.
Receiver control cable -----------------10 feet long standard,
or 1 to 50 feet long with custom order.
Receiver control cable -----------------Extendable to 600 feet
with optional cables.
Receiver Power Adapter ------------120 VAC input and 12 VDC 500
mA output, included.
Receiver Battery Holder -------------8 AAA batteries that lasts
5 to 15 hours, included.
Receiver Power Consumption ----12 VDC at 100 mA
Receiver Weight: -----------------------1.5 pounds.
Receiver Dimensions: -----------------5.5" High x 3.25" Wide x
1.5" Deep.
Ready to use pan tilt system. |
 |
Operation:
1. Be sure your MP-101 or your MP-360 is in the
Manual mode (M), and has power connected to it.
2. Connect the control cable to your
MP-101 or your MP-360.
3. Connect the AC / DC power supply to
the 12 VDC power jack. There is no power switch, the unit
is "on" as soon as power is connected.
Transmitter button functions:
#1 is Tilt Up and #4 is Tilt Down.
#3 is Pan Left and #2 is Pan Right.
Not for use around dangerous environments such as High
voltage, Explosive atmospheres or Moving equipment etc.
Please Think before you use it.
KPT-MP Wireless Keychain Pan & Tilt Remote Control |
Close up view of the
worlds smallest,
hand held, pan tilt, remote control.
|
|
|
Home Page > Motorized Pan Tilt Heads and Systems > Wireless Keychain Controller
